Showing posts with label grafting. Show all posts
Showing posts with label grafting. Show all posts

Queen Grafting Techniques and Tools

Thursday, 5 September 2024

Last week’s blog explored one option for rearing queens known as the Cloake Board Method. An important step in the queen rearing process is grafting the larvae. There are multiple techniques and tools which can be utilized to graft queens, and this week’s blog will explore those options and hopefully provide guidance to beekeepers who are new to queen rearing.

Queen Grafting Techniques and Tools

Beekeepers who intend to produce queens on a larger scale typically do so by grafting. Grafting is the process of transferring a larva from a brood cell into a plastic or wax queen cell cup1. This process is also known as the Doolittle method. Grafting takes an abundance of practice, and the small details of the process cannot be overlooked. To be successful at grafting a beekeeper must have patience, a steady hand and excellent vision.

The first step in the grafting process is to select a grafting frame from the breeder colony1. The chosen breeder colony should have the desired traits the beekeeper wants within their operation, such as: a good laying queen, strong colony build-up, and non-aggressive behavior. The desired traits of a breeder colony are entirely dependent on the beekeeper’s needs and preference. In many larger scale queen producing operations their priority is to keep a high amount of genetic diversity by grafting from numerous breeder colonies all with different genetics.

Furthermore, when selecting the grafting frame from the breeder colony there are specific things to look for. The most important thing to find on a grafting frame is an abundance of larvae that are between 12 and 24 hours old1. These larvae will be very small with a slight comma-shaped curvature, while older larvae are larger with a more defined C-shape1. The age of the larvae affects the acceptance rate of queen cells1. A study by Rehman et al. found that the younger the larvae are grafted the higher the acceptance rate of queen cells in colonies. Larvae that were grafted between 12-24 hours had an acceptance rate of 76.7%, whereas those grafted between 24-48 hours had an acceptance rate of 55.7% and if grafted between 48-72 hours the acceptance rate dropped to 20.0%.

There are additional risks to grafting older larvae as well. First, queens produced from older larvae do not perform as well. Second, if larvae vary in age, there is a risk of the older larvae developing first and emerging prior to harvesting cells. The earliest queens to emerge are likely to kill other developing cells, which may be a serious loss of time, money and resources.

Once the grafting frame has been taken out of the breeder colony it is essential to start grafting right away. This is because larvae are vulnerable to chilling, desiccation and starvation outside of the hive1. The use of a damp towel over the grafting frame can help keep the humidity high enough for the larvae short term. Most often grafting is done in a sheltered warm area. It is typically easiest to place the grafting frame on an incline and use a headlamp to find the ideal larvae on the frame. Therefore, it is important to select a frame with lots of young larvae to minimize the amount of time spent searching for the correct larvae.

There are a variety of grafting tools to choose from. When new to grafting, it is recommended to try a variety of tools to determine a personal preference. Two of the more popular options for grafting tools are the Chinese tool and the German tool. The Chinese grafting tool has a pliable plastic tip which slides under the larva and royal jelly, and it is a good option because it provides a sufficient amount of royal jelly into the cell cup1. The German tool is made of stainless steel with a fine tip end, which provides good precision when picking up and setting down the larva.

Grafting using German tool (ATTTA©2024).

To graft, place the grafting tool underneath the larva and gently lift it outside of the cell. It is best practice to graft from behind the curvature of the larva and aim to scope a small amount of royal jelly too. Always place the larva down in the exact same position it was retrieved in. Changing the position of the larva could result in the larva drowning in royal jelly. Larvae are placed into queen cell cups and the cups are placed into grafting bars with fit into the grafting frame. When transporting the newly grafted frame cells should face upwards and can be covered with a damp cloth to avoid desiccation. 

There is a benefit to priming the queen cell cups with royal jelly prior to placing any larvae inside of them1. Priming with royal jelly prevents desiccation and provides a small amount of nutrition to the larvae1. However, as mentioned, larvae can drown in royal jelly so be careful of their placement and use the royal jelly sparingly. The study by Rehman et al. found that priming cells with royal jelly resulted in a queen cell acceptance rate of 78.8%, whereas those not primed with royal jelly (dry grafting) had an acceptance rate of 37.8%. 

Overall, grafting allows beekeepers to make large numbers of queens. The process of rearing queens through grafting requires an abundance of practice to be successful and is a rewarding skill to learn.

Connecting with ATTTA Specialists

If you’d like to connect with ATTTA specialists or learn more about our program, you can:

visit our website at https://www.perennia.ca/portfolio-items/honey-bees/

Email abyers@perennia.ca

References

  1. Rehman, N.U., Anjum, S.I., Qureshi, N.A., Khan, M.H., Albasher, G., Kaleem, M. and Kamal, A., 2024. The effect of larval age, and wet and dry grafting, on the rearing of queen bees using the Doolittle grafting method. Entomological Research, 54(1), p.e12700.

Cell Builder Colonies

Thursday, 17 June 2021

Welcome back for another post of the Queen Production Series! The previous blog provided an overview of how to obtain larvae for queen production. Today, we discuss the next stage of development for these larvae, which occurs in cell builder colonies. There are different options for cell builders and in this blog, we describe one way to use a starter and finisher colony to raise your queens.

Cell Builder Colonies

Queen production requires manipulation of honey bee colonies so that workers feel the impulse to raise queens. Naturally, there are three instances which trigger worker bees to raise queens.  These include bees preparing to swarm, emergency queen replacement and supersedure.  Cell builder colonies are designed to mimic the first two situations.

Cell building refers to the process of placing a grafting frame containing young larva into a colony to allow the worker bees to develop these into queen cells.  As the larva ages, workers extend the wax cells to accommodate its growth and eventually fully encapsulate, in the queen cell, the pupa which can now develop into an adult. In queen production, this takes place in two stages. The first stage occurs within a starter colony and the second within a finisher colony.


Figure 1 A grafting frame showing the bees drawing out queen cells when placed in the starter colony. (photo: University of New Hampshire Cooperative extension).


The starter colony is typically a single hive and must be queenless. By placing a grafting frame full of fresh, young larvae into a queenless colony, you provide the workers with the material needed to become queenright again and they will quickly begin to raise the larvae as queens. Queen producers often prepare their starter colony a day before introducing the grafting frame. The colony should be strong and requires a particular composition of frames.  This may need additional resources from donor colonies. The middle space should be reserved for the grafting frame. On either side of the grafts, provide a frame of pollen and a frame of older larvae to attract the nurse bees to this area. Surrounding these, place frames of capped brood and feed frames against the walls. It is also advisable to provide a frame of foundation, to help deter this very strong hive from swarming. The grafting frame remains in the starter colony for 48 hours. After this time, the cells should be packed with royal jelly and wax begun to be drawn out.

Figure 2 Queen cells taken from finisher colony, ready to be transferred to queenless colonies (splits) or mating nucs. (Photo: M. Girard in Bixby et al., 2019*)

The next stage of development occurs inside a finisher colony. The finisher is a strong, queenright colony where queens can complete their development as they would in a swarming situation. After 48 hours in the starter, carefully transfer the graft into your cell finisher colony, prepared ahead of time. The finisher must be a double chamber hive and the queen must be excluded to the bottom chamber, away from the developing queen cells. Once again, the composition of the frames within the hive boxes is particular. In the bottom hive box, include frames of feed, open brood, an empty laying frame for the queen, and the queen herself! Then, place a queen excluder on top of the bottom box. The graft frame should be placed in the top box in the middle position, once again sandwiched between older larvae and pollen frames, then surrounded by capped brood, a foundation frame, and frames of honey.

After eight days in the finisher colony, the queen cells will be capped over and the cells will be ready to harvest! Be sure to remove the cells before the virgins begin to emerge, or there will be problems for the other queens. At this point, your queen cells are ready and might be placed in a mating nuc, a queenless colony or sold! But that is a topic for another day!

Reminder

We would also like to encourage everyone to complete our brief survey posted last week, FOUND HERE! Thank you to those who have completed the survey and we are looking forward to hearing from more of our readers. 

*Bixby, M., M.M. Guarna, S.E. Hoover, and S.F. Pernal. 2019. Canadian Honey Bee Queen Breeders’ Reference Guide. Canadian Association of Professional Apiculturists Publication pp 55.


 Connecting with ATTTA Specialists


If you’d like to connect with ATTTA specialists or learn more about our program, you can:


The Doolittle Method

Thursday, 3 June 2021

This week, the queen series returns to the discussion of how to raise queen honey bees. This blog is about obtaining larvae for queen rearing using the Doolittle method. The Doolittle method is a common and efficient way to raise many queen cells. It requires a few tools and some practice, and before long can be quite an enjoyable process. Read on to gain an overview of how you can begin to raise queens following the Doolittle method.

The Doolittle Method

Grafting young larvae from the brood nest is the essence of the Doolittle method. There are a few special tools that are required to facilitate this process: a grafting tool, cell cups, grafting bars, and grafting frames. These tools can be found at most beekeeping supply stores. Some beekeepers also choose to fashion their own. A grafting tool is a hand-held tool with a very fine tip, used to pick up larvae and place them in cell cups. Manufactured grafting tools sometimes include springs to help guide the larvae off the tip. Cell cups are used to hold the larvae which will develop into queens. They are the base of the queen cell and have dimensions equal to that of natural queen cups. Cell cups can be made of either wax or plastic. These cups adhere to grafting bars, also called cell bars, which are designed to hold up to 20 cell cups and fit into the grafting frame. Grafting frames have slots along the inner sides of the frame for the bars to slide in and out of and typically hold up to three grafting bars full of cell cups. With this equipment and a few strong, healthy hives- you can begin to graft!

Start by obtaining a frame from a strong hive which has lots of young larvae. It is critical that the larvae be young because these will develop into the strongest queens. Ideally, your larvae should be 12-24 hours old- the smallest larvae that you see in the frame. Using a head lamp or other source of cool lighting can help you to see these tiny organisms. Scoop a larva from the frame with the grafting tool and transfer it into the cell cup, which should be already secured onto the grafting frame. It is best to prepare the cell cups beforehand by adding a drop of royal jelly to the base. Royal jelly is the food that workers feed to larvae in order for them to develop into queens, so this jumpstarts that process and helps prevent the young larvae from drying out. Royal jelly can be purchased at some beekeeping supply shops, but does have the potential to spread pathogens between hives, as it is a hive product. Another option is to harvest your own royal jelly from swarm cells or unneeded queen cells in your own hives.

When your grafting bars are full of cell cups and your cell cups are full of larvae, the bar can be placed into a grafting frame. This completes the steps of the Doolittle method! The next step is to place this frame into a starter colony where the workers will begin to raise the larvae as queens. We will elaborate on this phase of queen rearing in the next post of the series. 



Connecting with ATTTA Specialists


If you’d like to connect with ATTTA specialists or learn more about our program, you can: