Showing posts with label Queen Breeding. Show all posts
Showing posts with label Queen Breeding. Show all posts

Banking Queens in Canada: New Canadian Research; Updates on ATTTA’s Queen Production Research and Initiatives

Thursday, 23 October 2025

Due to the challenges of producing honey bee queens in a northern climate during early spring, Canadian beekeepers rely on importing queens from other countries, especially early on in the season. This presents various risks to the Canadian beekeeping industry. To help support the Canadian industry and mitigate associated risks with importing queens, studies within Canada have focused on assessing the feasibility of storing queens in banks over the winter. This week’s blog will discuss current research on banking queens in Canada, with a focus on the quality and performance of banked queens. This week’s blog will also provide a brief overview of the Atlantic Tech Transfer Team for Apiculture’s queen production research, recent training opportunities and research plans for 2026.

Banking Queens in Canada: New Canadian Research;
Updates on ATTTA’s Queen Production Research and Initiatives

The availability of local honey bee queens in early spring is a major limiting factor for Canadian beekeepers. Due to Canada’s climate conditions and unavailability of adequate drone populations in the early spring, rearing local queens typically cannot begin until May and June depending on the region of Canada. Currently, Canadian beekeepers rely on queens imported from other parts of the world with warmer climates to meet demand for queens in early spring, which presents various risks to the Canadian beekeeping industry. Associated risks include introduction of various pests and/or diseases, treatment resistant pests and/or diseases, and an overreliance on external industries. To help mitigate associated risks, studies within Canada have focused on assessing the feasibility of storing queens in banks over the winter, with the aim of ensuring their availability in early spring of the following year.

Recently published research completed in Quebec in 2020/2021 aimed to assess the impact of overwintering queen banks on the nutritional and reproductive qualities of queens, as well as their overall performance (Boudreau and Giovenazzo, 2025). In September 2020, researchers prepared 8 queen banks each with 40 individually caged queens. Researchers selected to bank 40 queens per strong double colony as previous research indicated that more than 40 queens can lead to a higher mortality percentage in spring (Rousseau et al., 2019). On October 26, 2020, these queen bank colonies were placed in an indoor wintering facility with conditions previously researched by Rousseau et al., 2019. Additionally, 66 nucleus colonies with a laying queen were overwintered indoors as control queens for the study.

From October 26, 2020, to May 1, 2021, the banked queens had a winter survival rate of 37%, whereas the control queens had a survival rate of 89%. The range of queen survival between the 8 banks was between 11% and 70%. When comparing the control queens and banked queens in Spring 2021, the study found that there was no significant difference in the queen weight, ovary weight, sperm count, sperm viability, hemolymph protein, or vitellogenin percentage, between the two groups.

Researchers also assessed the performance of the surviving banked queens and control queens in newly made nucleus colonies throughout the 2021 beekeeping season. By August 18, 2021 there was no significant difference in the survival of the banked queens and control queens and their colonies. There was also no significant difference in the weight gain between these two groups of colonies. The study did reveal that colonies with banked queens had significantly less brood production during the first month after being introduced to nucleus colonies compared to the control queens.

Overall, this research demonstrated that banked queens and control queens had similar measured parameters for reproduction and nutritional status despite varying survival rates throughout the winter.  Although further research is required to improve queen banking techniques for Canadian winters, this study demonstrated that banked queens are a viable option for beekeepers and has the potential to enhance self-sufficiency in the beekeeping industry.

This past beekeeping season, the ATTTA team did some queen production within their operation to improve upon the team’s queen rearing skills and knowledge. In late June, the ATTTA team set-up two cloake board colonies which were grafted into weekly for five weeks. Produced queens cells were either placed in a mini mating nucleus colony or frozen for future research and/or teaching purposes. Successfully mated queens were either used in queenless colonies within the operation, introduced to newly made nucleus colonies, or frozen for future testing.

ATTTA 2025 mated queen.

In addition to ATTTA’s own steps towards queen production, the team organized and hosted queen production training, taught by guest instructor Alison Van Alten, to help support a sustainable queen production industry within the Maritime region.

This past summer the ATTTA team was able to gain practice in queen production, and has grown their number of colonies to better support queen production next year. The goal for next year will be to continue to grow colony numbers in order to support enough queen production to create a queen bank. ATTTA has previously done queen banking research from 2021 to 2023 and will be in a good position to resume this work next season with the goal of providing information to the Atlantic industry.

References

Lamothe Boudreau, M. and Giovenazzo, P., 2025. Physiological qualities of honey bee queens (Apis mellifera) overwintered in banks. Journal of Apicultural Research, pp.1-13.

Rousseau, A., Giovenazzo, P., Levesque, M., & Houle, E., 2019. Mass storage of honey bee queens overwintered at different temperatures in Canada. Centre de recherche en sciences animales de Deschambault.

Connecting with ATTTA Specialists

If you’d like to connect with ATTTA specialists or learn more about our program, you can:

visit our website at https://www.perennia.ca/portfolio-items/honey-bees/

Email attta@perennia.ca



Queen Grafting Techniques and Tools

Thursday, 5 September 2024

Last week’s blog explored one option for rearing queens known as the Cloake Board Method. An important step in the queen rearing process is grafting the larvae. There are multiple techniques and tools which can be utilized to graft queens, and this week’s blog will explore those options and hopefully provide guidance to beekeepers who are new to queen rearing.

Queen Grafting Techniques and Tools

Beekeepers who intend to produce queens on a larger scale typically do so by grafting. Grafting is the process of transferring a larva from a brood cell into a plastic or wax queen cell cup1. This process is also known as the Doolittle method. Grafting takes an abundance of practice, and the small details of the process cannot be overlooked. To be successful at grafting a beekeeper must have patience, a steady hand and excellent vision.

The first step in the grafting process is to select a grafting frame from the breeder colony1. The chosen breeder colony should have the desired traits the beekeeper wants within their operation, such as: a good laying queen, strong colony build-up, and non-aggressive behavior. The desired traits of a breeder colony are entirely dependent on the beekeeper’s needs and preference. In many larger scale queen producing operations their priority is to keep a high amount of genetic diversity by grafting from numerous breeder colonies all with different genetics.

Furthermore, when selecting the grafting frame from the breeder colony there are specific things to look for. The most important thing to find on a grafting frame is an abundance of larvae that are between 12 and 24 hours old1. These larvae will be very small with a slight comma-shaped curvature, while older larvae are larger with a more defined C-shape1. The age of the larvae affects the acceptance rate of queen cells1. A study by Rehman et al. found that the younger the larvae are grafted the higher the acceptance rate of queen cells in colonies. Larvae that were grafted between 12-24 hours had an acceptance rate of 76.7%, whereas those grafted between 24-48 hours had an acceptance rate of 55.7% and if grafted between 48-72 hours the acceptance rate dropped to 20.0%.

There are additional risks to grafting older larvae as well. First, queens produced from older larvae do not perform as well. Second, if larvae vary in age, there is a risk of the older larvae developing first and emerging prior to harvesting cells. The earliest queens to emerge are likely to kill other developing cells, which may be a serious loss of time, money and resources.

Once the grafting frame has been taken out of the breeder colony it is essential to start grafting right away. This is because larvae are vulnerable to chilling, desiccation and starvation outside of the hive1. The use of a damp towel over the grafting frame can help keep the humidity high enough for the larvae short term. Most often grafting is done in a sheltered warm area. It is typically easiest to place the grafting frame on an incline and use a headlamp to find the ideal larvae on the frame. Therefore, it is important to select a frame with lots of young larvae to minimize the amount of time spent searching for the correct larvae.

There are a variety of grafting tools to choose from. When new to grafting, it is recommended to try a variety of tools to determine a personal preference. Two of the more popular options for grafting tools are the Chinese tool and the German tool. The Chinese grafting tool has a pliable plastic tip which slides under the larva and royal jelly, and it is a good option because it provides a sufficient amount of royal jelly into the cell cup1. The German tool is made of stainless steel with a fine tip end, which provides good precision when picking up and setting down the larva.

Grafting using German tool (ATTTA©2024).

To graft, place the grafting tool underneath the larva and gently lift it outside of the cell. It is best practice to graft from behind the curvature of the larva and aim to scope a small amount of royal jelly too. Always place the larva down in the exact same position it was retrieved in. Changing the position of the larva could result in the larva drowning in royal jelly. Larvae are placed into queen cell cups and the cups are placed into grafting bars with fit into the grafting frame. When transporting the newly grafted frame cells should face upwards and can be covered with a damp cloth to avoid desiccation. 

There is a benefit to priming the queen cell cups with royal jelly prior to placing any larvae inside of them1. Priming with royal jelly prevents desiccation and provides a small amount of nutrition to the larvae1. However, as mentioned, larvae can drown in royal jelly so be careful of their placement and use the royal jelly sparingly. The study by Rehman et al. found that priming cells with royal jelly resulted in a queen cell acceptance rate of 78.8%, whereas those not primed with royal jelly (dry grafting) had an acceptance rate of 37.8%. 

Overall, grafting allows beekeepers to make large numbers of queens. The process of rearing queens through grafting requires an abundance of practice to be successful and is a rewarding skill to learn.

Connecting with ATTTA Specialists

If you’d like to connect with ATTTA specialists or learn more about our program, you can:

visit our website at https://www.perennia.ca/portfolio-items/honey-bees/

Email abyers@perennia.ca

References

  1. Rehman, N.U., Anjum, S.I., Qureshi, N.A., Khan, M.H., Albasher, G., Kaleem, M. and Kamal, A., 2024. The effect of larval age, and wet and dry grafting, on the rearing of queen bees using the Doolittle grafting method. Entomological Research, 54(1), p.e12700.

Cloake Board Method

Thursday, 29 August 2024

As beekeepers become more experienced in their day-to-day beekeeping activities, they often find themselves looking to expand their operation, or to incorporate a new practice into their operation. Queen rearing is one of the more interesting and rewarding aspects of beekeeping1. Not only does the practice of raising queens provide self-sustainability to a beekeeping operation, but it also provides the opportunity to earn additional income if selling queens to other beekeepers. There are numerous methods of queen rearing, but this week’s blog will focus on one method known as the Cloake Board Method.

Cloake Board Method

All queen rearing methods follow the same concept of creating conditions that contribute to a natural impulse for bees to swarm1. During the spring build up season, colonies naturally favor colony reproduction. Later in the season, queen rearing can be more of a challenge1. Throughout this blog we will explore the methodology and theory of the Cloake Board Method.

The Cloake Board Method is credited to its originator Harry Cloake2. The Cloake Board Method combines both a cell starter and cell finisher colony into a single unit2. If interested in learning more about the cell starter and cell finisher method, please check out ATTTA’s blogs “Raising Queen Honey Bees (Thursday 13 May 2021)”, “Queen Breeding (Thursday 27 May 2021 )” and “Cell Builder Colonies (Thursday 17 June 2021)”. The Cloake Board Method, just like the starter/finisher method, has both a queen-less and queen-right component. The main advantage of this method is that it eliminates the need to move developing larvae in between a starter (queen-less colony) and finisher (queen-right colony)1. Instead, the conditions of both a starter and finisher are achieved by closing and then opening a cloake board.

A cloake board consists of an outer wooden frame, which fits between two hive boxes, and has a sliding board which can easily separate or combine two boxes of bees. When the cloake board is closed the colony on top is queen-less, and when the board is opened the colony becomes queen-right1. When setting up the Cloake Board Method, a queen excluder is placed below the cloake board to confine the queen to the bottom box. Additionally, the bottom and top entrances are placed in opposite directions which facilitates bees exiting from the bottom box to re-enter in the top box, and the result is a boosted population in the top box1.

Setting up of a cloake board colony for rearing queens (ATTTA©2024)

The top box is where the grafted frame of young larvae will be placed. Therefore, it is important that the box contains a large population of young nurse bees to care for developing queens1. When setting up the cloake board colony, frames of young, uncapped brood should be moved up from the lower box, which will attract more nurse bees upward.

The cloake board colony should be prepared several days prior to the planned grafting day. During this time make sure the queen is marked and confined to the bottom box. Place the cloake board between the boxes, but the sliding piece remains out. Start to feed the colony sugar water and pollen in the upper box where the grafted frame will be placed. Continue to feed the colony sugar water and pollen leading up to grafting. One day prior to grafting, it is important to check that the queen is still confined to the bottom box. Each frame should be inspected for any unwanted queen cells at which point they can be removed. Make sure the top box contains a strong population of bees with several frames of brood and an abundance of food. A frame of foundation can be placed in the top box as a placeholder for the grafted frame. Finally, place the slide piece into the cloake board to create a queen-less state in the top box for 12-24 hours prior to grafting.

Next week’s blog will discuss details of various grafting tools and techniques. Grafting should be done 12-24hrs after creating a queen-less state in the top box, and the grafted frame will replace the placeholder frame of foundation.

Then, 48hrs after placing the grafted frame the cloake board should be opened to create a queen-right colony in the top box. This triggers a swarm impulse and provides a higher quality of care to the developing queens1.

Finally, 10 days after the graft cells are ready to be harvested from the colony. The grafted frame containing mature, capped queen cells should be handled very carefully to avoid injuring queens. Queen cups should be carefully cut from the grafting bar, and either be placed directly into a queen-less colony, into an incubator for transporting, or into an incubator for short-term storage.

It is essential to pull the queen cells out of the colony prior to emergence. For any beekeeper considering queen rearing remember that the timeline of activities is strict, and that the method will not be successful if not followed precisely.

Read next week’s blog to learn more about queen rearing, with a focus on grafting techniques.

Connecting with ATTTA Specialists

If you’d like to connect with ATTTA specialists or learn more about our program, you can:

visit our website at https://www.perennia.ca/portfolio-items/honey-bees/

Email abyers@perennia.ca

References
1.      Johansson, T.S.K. and Johansson, M.P., 1973. Methods for rearing queens. Bee world, 54(4), pp.149-175.
2.      Cloake, H. 1977. Queen Cell Raising, My way. Proc. Apimondia 1977. Adelaide, Australia.

Black Queen Cell Virus: One of the Most Prevalent Viral Pathogens of Honey Bees

Thursday, 26 August 2021

During the current pandemic, social isolation has helped control the spread of Covid-19.  Unfortunately, honey bees are unable to socially isolate to curb the spread of viral diseases in their populations.  They live in large numbers, in very close proximity, engage in trophallaxis and allogrooming.  Spread of viral disease in a honey be colony is almost inevitable.  Interestingly, although honey bees may struggle to prevent viral diseases moving through their colonies, they may be helping us stay healthy.  There is recent work investigating how hive products can fight Covid-19 (Yahya Al Naggar, 2021) and even how honey bees are able to diagnose the Coronavirus.  Honey bee scientists in the bio-veterinary research laboratory at Wageningen University have successfully trained bee to detect Coronavirus positive samples to gain a food reward (Wageningen, 2021).  Even when it comes to viruses, we find further examples of how honey bees help us!  This week we will look at Black Queen Cell virus as we near the end of our series on honey bee viruses.

Black Queen Cell Virus: One of the Most Prevalent Viral Pathogens of Honey Bees

As the name implies, the Black Queen Cell Virus (BQCV) is a disease associated with developing queens at the larval and pupal stages.  The virus is transmitted horizontally by the worker bees as they move from infected cells to healthy queen cells.  There is also a suggestion that vertical transmission may occur from the queen through to her eggs.  Infection of BQCV in a developing queen larva will result in the death and ultimate necrosis of the pupa.  This results in the blackened, decomposing, undeveloped queen and the classic symptoms used to diagnose this disease.  This virus is most commonly seen in the spring of year but not limited to that season.  It has been suggested that this is the most common, although least understood, of the approximately 24 viruses infecting honey bees.  Believed to be present asymptomatically in adult queens and workers, the elevated titres seen in the developing queens cause morbidity.  Therefor this is a serious disease for the honey bee queen production industry.





Figure1. Virion Structure of the Black Queen Cell Virus (Spurny et al. 2017).


It has become obvious from our previous discussions that varroa infestation is linked to viral infections of honey bees.  This is not the only pest or disease which is been associated with viral disease transmission.  Nosema and  BQCV have been demonstrated in coinfections.  It has even been suggested that Nosema ceranae and BQCV act synergistically to significantly decrease host survival.  Additionally, Nosema and varroa have a negative, interactive effect on honey bee health.  So it is not surprising that varroa mite infestation are associated with this virus as well.  It would be easy to imagine this infectious triad could collapse a colony.  Optimistically, all three of these are less likely to occur in strong, healthy colonies.


Figure 2. Queen cell showing BQCV infection (Photo: Robert Snyder, BeeInformed)

There is no treatment for BQCV but there are ways to manage the risk of this disease.  As suggested above, ensure that your colonies are kept strong and healthy.  Manage your varroa mite populations.  Apply standard biosecurity practices, such as flaming hive tools, moving bees and equipment carefully between apiaries and operations.  Monitor for Nosema and treat if necessary.  Specific to queen operations, ensure specialist equipment such as grafting tools are sterile.  Ensure that cell builder and finisher colonies are healthy.  Mating nucs should be kept well fed, healthy and disease free!  If you find an incidence of BQCV in your operation, put appropriate measures in place to trace back the source and stop onward spread.

Next week will conclude this short series on honey bee viral disease as we look at Kashmir Bee virus.  This virus is also linked to varroa mite infestation and a close relative of the previously discussed Acute Bee Paralysis Virus.  Make sure not to miss any of our blogs by subscribing through the link in the left hand column.

Spurny R, Pridal A, Palkova L, Kiem HKT, de Miranda JR, Plevka P. Virion Structure of Black Queen Cell Virus, a Common Honeybee Pathogen. J Virol. 2017; 91(6): e02100–16. pmid:28077635

Wageningen University 2021 https://www.wur.nl/en/news-wur/Show/Training-bees-to-smell-the-coronavirus.htm

Yahya Al Naggar, John P. Giesy, Mohamed M. Abdel-Daim, Mohammad Javed Ansari, Saad N. Al-Kahtani, Galal Yahya, 2021 Fighting against the second wave of COVID-19: Can honeybee products help protect against the pandemic?, Saudi Journal of Biological Sciences, Volume 28, Issue 3, Pages 1519-1527


Connecting with ATTTA Specialists


If you’d like to connect with ATTTA specialists or learn more about our program, you can:




Dutch Honey Bees Resistant to Varroa Mite Imported to Australia to Help Guard Against the Pest

Thursday, 29 July 2021

We have covered introductory information on queen production in previous blogs, meanwhile there are current practices and research working at the cutting edge of this aspect of our industry.  The use of selective breeding, artificial reproductive technologies, and controlled mating are improving honey bee stocks worldwide.  In this week’s blog, we will explore a recent article from the Australian Broadcasting Corporation with exciting news on beekeepers’ fight against varroa mites! We discuss the implications of this work for Atlantic beekeepers and how this links to local research around improving Canadian honey bee stocks.

Dutch Honey Bees Resistant to Varroa Mite Imported to Australia to Help Guard Against the Pest

Managing for varroa mites has become a standard part of the beekeeping season for most of the world. In 2013, a global effort by apiarists began in earnest to try to mitigate the impact of varroa mites on honey bees. Together with support from European and American beekeepers and entomologists, Dutch apiarist JanBart Fernhout began practicing intense selection and controlled mating to develop a progeny of bees resistant to varroa infestation. His highly focused breeding program progressively bred queens and drones of higher hygienic behavior until he finally attained a stock of varroa resistant honey bees!

Only a scarce few regions in the beekeeping world remain free of varroa mites and Australia is one of them. Consequently, importation of any honey bee material is extremely limited on this continent. This is why beekeepers and scientists are thrilled with the successful importation of the varroa resistant stock of bees from the Netherlands, which were first subject to intensive screening and quarantine. Australians are hopeful that this successful importation might pave the way for more safe imports.

After screening, Australian bee breeder David Briggs managed to encourage the new stock to mate with one another, allowing him to then collect fresh, young larvae for his own breeding purposes. Briggs sought to raise queens using the imported, varroa resistant Dutch bees and artificially inseminate them with sperm from highly selected Australian drones. In this way, an Australian varroa-resistant honey bee stock could be locally available to beekeepers. The initial breeding was successful. With skill and a microscope, he was able to carefully inseminate the queens with semen collected from Australian drones. Artificial insemination is the most controlled form of honey bee breeding. When spring comes in Australia, the bees from this first successful breeding will begin laying eggs and the breeding program will continue to develop the Dutch-Australian varroa resistant stock.


Another region where varroa mites have yet to spread is our very own province of Newfoundland and Labrador! Like Australia, Newfoundland has strict importation laws and protocols. Perhaps in the future, the successful import of varroa resistant bees may offers one option to support this provinces beekeeping industry. Furthermore and nearer to home, there are Canadian scientists who are also working hard to improve our own stock of bees in Canada. Dr. Pierre Giovenazzo is one such scientist from Quebec. 

Dr. Giovenazzo has undertaken research to improve the Canadian bee stock through selective breeding. His work explores the possibilities of improving early spring development, honey production, winter consumption, and hygienic behavior, in addition to resistance towards varroa infestation. These traits would be beneficial to Canadian beekeepers in the face of long, northern winters. Complimentary to this work, Dr. Giovenazzo has most recently published research on overwintering Canadian queens in queen banks. With the development of successful mass-queen overwintering, Canada can become less reliant on imports of queen honeybees in the spring. With this comes reduced risk of invasive foreign pests and diseases and a honey bee stock more strongly adapted to our particular environment.

Reproductive technologies and selective breeding techniques have proven to be powerful tools in improving other livestock species.  Practices like artificial insemination are common place in, for example, dairy cow production.   How these emerging technologies and practices will be fully applied to honey bee husbandry is yet to be determined but we are entering an exciting time when science and research will blend more fully into our hands on beekeeping practices for the overall benefit of our industry!

*https://www.abc.net.au/news/2021-07-16/bee-imports-to-protect-against-varroa-mite/100289356



Connecting with ATTTA Specialists


If you’d like to connect with ATTTA specialists or learn more about our program, you can:


Cell Builder Colonies

Thursday, 17 June 2021

Welcome back for another post of the Queen Production Series! The previous blog provided an overview of how to obtain larvae for queen production. Today, we discuss the next stage of development for these larvae, which occurs in cell builder colonies. There are different options for cell builders and in this blog, we describe one way to use a starter and finisher colony to raise your queens.

Cell Builder Colonies

Queen production requires manipulation of honey bee colonies so that workers feel the impulse to raise queens. Naturally, there are three instances which trigger worker bees to raise queens.  These include bees preparing to swarm, emergency queen replacement and supersedure.  Cell builder colonies are designed to mimic the first two situations.

Cell building refers to the process of placing a grafting frame containing young larva into a colony to allow the worker bees to develop these into queen cells.  As the larva ages, workers extend the wax cells to accommodate its growth and eventually fully encapsulate, in the queen cell, the pupa which can now develop into an adult. In queen production, this takes place in two stages. The first stage occurs within a starter colony and the second within a finisher colony.


Figure 1 A grafting frame showing the bees drawing out queen cells when placed in the starter colony. (photo: University of New Hampshire Cooperative extension).


The starter colony is typically a single hive and must be queenless. By placing a grafting frame full of fresh, young larvae into a queenless colony, you provide the workers with the material needed to become queenright again and they will quickly begin to raise the larvae as queens. Queen producers often prepare their starter colony a day before introducing the grafting frame. The colony should be strong and requires a particular composition of frames.  This may need additional resources from donor colonies. The middle space should be reserved for the grafting frame. On either side of the grafts, provide a frame of pollen and a frame of older larvae to attract the nurse bees to this area. Surrounding these, place frames of capped brood and feed frames against the walls. It is also advisable to provide a frame of foundation, to help deter this very strong hive from swarming. The grafting frame remains in the starter colony for 48 hours. After this time, the cells should be packed with royal jelly and wax begun to be drawn out.

Figure 2 Queen cells taken from finisher colony, ready to be transferred to queenless colonies (splits) or mating nucs. (Photo: M. Girard in Bixby et al., 2019*)

The next stage of development occurs inside a finisher colony. The finisher is a strong, queenright colony where queens can complete their development as they would in a swarming situation. After 48 hours in the starter, carefully transfer the graft into your cell finisher colony, prepared ahead of time. The finisher must be a double chamber hive and the queen must be excluded to the bottom chamber, away from the developing queen cells. Once again, the composition of the frames within the hive boxes is particular. In the bottom hive box, include frames of feed, open brood, an empty laying frame for the queen, and the queen herself! Then, place a queen excluder on top of the bottom box. The graft frame should be placed in the top box in the middle position, once again sandwiched between older larvae and pollen frames, then surrounded by capped brood, a foundation frame, and frames of honey.

After eight days in the finisher colony, the queen cells will be capped over and the cells will be ready to harvest! Be sure to remove the cells before the virgins begin to emerge, or there will be problems for the other queens. At this point, your queen cells are ready and might be placed in a mating nuc, a queenless colony or sold! But that is a topic for another day!

Reminder

We would also like to encourage everyone to complete our brief survey posted last week, FOUND HERE! Thank you to those who have completed the survey and we are looking forward to hearing from more of our readers. 

*Bixby, M., M.M. Guarna, S.E. Hoover, and S.F. Pernal. 2019. Canadian Honey Bee Queen Breeders’ Reference Guide. Canadian Association of Professional Apiculturists Publication pp 55.


 Connecting with ATTTA Specialists


If you’d like to connect with ATTTA specialists or learn more about our program, you can:


Queen Breeding

Thursday, 27 May 2021

Our blog today brings us back to the queen series! In our last post we introduced queen rearing, the steps and techniques used to propagate queen honey bees. This week, we will explore queen breeding. Queen breeding goes a step beyond merely technique and aims to not only produce queen bees, but produce honey bee colonies with desired characteristics.

Queen Breeding

Honey bee breeding programs are distinguished by an intense selection process, prior to production, and controlled mating after the queens have emerged. In doing this, breeders work to improve honey bee stock by increasing desired traits in a population and reducing undesirable traits. This is based on the condition that those preferred traits are heritable from parent to offspring. For example, queen producers will often strive to raise gentle queens. To do this, queen breeders first select gentle colonies from which to obtain larvae for rearing. Potential breeder colonies are put through rigorous testing and record keeping to ensure that they demonstrate traits breeders have identified as superior.



The next essential phase of honey bee breeding occurs after the steps of rearing queens have been completed and the developed queens are ready to emerge. Breeders must control the mating of newly emerged queens. To produce the best colonies, top quality queens need to be mated with top quality drones. Therefore, breeders must also carry out rigorous testing and record keeping to select drone mother colonies. Colonies who pass the selection process are provided with ample food resources and stocked with drone frames so that the colony will produce many drones in time to mate with the virgin queens. Timing is crucial here, as it takes a drone about five weeks to achieve sexual maturity, from the time it is laid as an egg, and it takes a queen bee only three.

The actual mating of these desirable drones and queens is the most challenging step of queen breeding. Honey bees mate while flying and a well mated queen will mate with upwards of 15 drones. There are a few techniques that breeders implement to control mating. The most intensive and absolute method is to artificially inseminate queens with drone sperm. Another method is to create geographically isolated mating yards for the produced queens and drones, ensuring that no outside drones can gain access. The most typical way is called drone flooding. In this technique, breeders ensure that drone mother colonies produce an overwhelming number of drones within the mating yard, thereby increasing the odds of these drones mating with the virgin queens.

Canadian honey bee breeding programs have helped to make great improvements to our national honey bee stock. For example, the Ontario Bee Breeders Association has been very successful in incorporating tracheal mite resistance into their breeding programs.  Breeding could also be an important tool in improving Varroa mite resistance and overwintering ability in our cooler climate.

Understanding the basics of queen breeding can help improve the success of queen producers of all levels. Breeding and rearing are complimentary processes. After all, the first step of queen production is to select your larvae and this is a topic we will dive into in our next queen blog!



Connecting with ATTTA Specialists


If you’d like to connect with ATTTA specialists or learn more about our program, you can: